Lithium battery IEC62133 test report processing process——ZRLK

At present, according to the relevant regulations of IATA's "Dangerous Goods Regulations", airlines are applicable to (including but not limited to) mobile phone batteries, laptop batteries, walkie-talkie batteries, rechargeable lithium batteries that are transported alone or together with equipment. Camera batteries, remote control toy batteries and other products have made relevant testing regulations, of which IEC62133 is an international standard for batteries. Small partners who need to apply for the lithium battery IEC62133 test report can contact our company ZRLK at any time!

Lithium battery IEC62133 certification test items

1. High simulation test. Under the conditions of pressure≤11.6kPa and temperature of 20±5℃.

2. Thermal test. Under the conditions of 75±2℃ and -40±2℃, the high and low temperature impact test is carried out, the storage time at the extreme temperature is ≥6h, the high and low temperature conversion time is less than or equal to 30min, the impact is 10 times, and the room temperature (20±5℃) is stored for 24h, The total duration of the trial is at least one week.

3. Vibration test. Complete a reciprocating logarithmic sweep sinusoidal vibration from 7Hz to 200Hz within 15min, and complete 12 vibrations in three-dimensional direction within 3h;

4. Impact test. 150g, 6ms or 50g, 11ms half-sine shock, 3 times for each installation direction, 18 times in total;

5. External short circuit test. Short-circuit at 55±2°C and external resistance <0.1Ω, and the short-circuit time lasts for 1h after the battery temperature returns to 55±2°C.

6. Crash test. A 9.1kg weight is dropped on the battery with a 15.8mm round rod from a height of 61±2.5cm, and the surface temperature of the battery is detected.

7. Overcharge test. Under the condition of twice the maximum continuous charging current and twice the maximum charging voltage, overcharge the battery for 24h.

8. Forced discharge test. The battery is connected in series with a 12V DC power supply, and is forced to discharge at the maximum discharge current.

Information to be prepared for lithium battery IEC62133 certification application

1. Fill in the application form

2. Provide battery specifications

3. Packaging pictures (outer packaging pictures, open outer packaging pictures, inner packaging pictures)

4. Sample: 15 batteries, 25 cells

Lithium battery IEC62133 test report processing process

1. Sign the contract

2. Send samples, fill in the information, and arrange to pay the first payment

3. Audit data

4. Laboratory opening

5. Arrange to go to the laboratory for testing

6. After passing the test, a draft report will be issued

7. Customer confirmation draft report

8. Issue a formal report

For lithium battery IEC62133 test report, please contact our company ZRLK, we will provide you with professional and efficient testing and certification services with favorable prices and considerate service. If you provide us with product pictures and specifications, we will give you corresponding cycles, quotations and specific solutions according to your products. You are welcome to inquire!